We can Extract MCU PIC18F2431 Program, please view the MCU PIC18F2431 features for your reference:
Special Microcontroller Features:
· 100,000 erase/write cycle enhanced Flash program memory typical
· 1,000,000 erase/write cycle data EEPROM memory typical
· Flash/data EEPROM retention: 100 years when Extract MCU
· Self-programmable under software control
· Priority levels for interrupts
· 8 X 8 Single-cycle Hardware Multiplier
· Extended Watchdog Timer (WDT):
- Programmable period from 41 ms to 131s
· Single-supply In-Circuit Serial Programming? (ICSP?) via two pins if Extract MCU
· In-Circuit Debug (ICD) via two pins
- Drives PWM outputs safely when debugging
This family offers the advantages of all PIC18 microcontrollers – namely, high computational performance at an economical price, with the addition of high endurance enhanced Flash program memory and a high-speed 10-bit A/D converter before Extract MCU.
On top of these features, the PIC18F2331/2431/4331/4431 family introduces design enhancements that make these microcontrollers a logical choice for many high performance, power control and motor control applications. These special peripherals include after
2015年8月23日星期日
2015年8月20日星期四
STM8S003K3 ic momory read, MCU code taking, ic copy,pcb clone
STM8S003K3Mainstream Value line 8-bit MCU with 8 Kbytes Flash, 16 MHz CPU,
integrated EEPROMActive The STM8S003F3/K3 value line 8-bit microcontrollers offer 8
Kbyte Flash program memory, plus integrated true data EEPROM. They are referred to as
low-density devices in the STM8S microcontroller family reference manual (RM0016).
TheSTM8S003F3/K3 value line devices provide the following benefits: performance,
robustness and reduced system cost.
Device performance and robustness are ensured by true data EEPROM supporting up to 100000 write/erase cycles, advanced core and peripherals made in a state-of-the-art
technology at 16 MHz clock frequency, robust I/Os, independent watchdogs with separate
clock source, and a clock security system.
The system cost is reduced thanks to a high system integration level with internal clock oscillators, watchdog, and brown-out reset.
Full documentation is offered as well as a wide choice of development tools.
We have now successfully get the MCU Memory of the full series STM8S/SEM32F and disassembling,you can get more information by click: www.unlockmcu.com
Extract MCU PIC18F2431 Program,IC memory take
We can Extract MCU PIC18F2431 Program, please view the MCU PIC18F2431 features for your reference:
Special Microcontroller Features:
· 100,000 erase/write cycle enhanced Flash program memory typical
· 1,000,000 erase/write cycle data EEPROM memory typical
· Flash/data EEPROM retention: 100 years when Extract MCU
· Self-programmable under software control
· Priority levels for interrupts
· 8 X 8 Single-cycle Hardware Multiplier
· Extended Watchdog Timer (WDT):
- Programmable period from 41 ms to 131s
· Single-supply In-Circuit Serial Programming™ (ICSP™) via two pins if Extract MCU
· In-Circuit Debug (ICD) via two pins
- Drives PWM outputs safely when debugging
This family offers the advantages of all PIC18 microcontrollers – namely, high computational performance at an economical price, with the addition of high endurance enhanced Flash program memory and a high-speed 10-bit A/D converter before Extract MCU.
On top of these features, the PIC18F2331/2431/4331/4431 family introduces design enhancements that make these microcontrollers a logical choice for many high performance, power control and motor control applications. These special peripherals include after Extract MCU:
· 14-bit resolution Power Control PWM Module (PCPWM) with programmable dead time insertion
· Motion Feedback Module (MFM), including a 3-channel Input Capture (IC) Module and Quadrature Encoder Interface (QEI)
· High-speed 10-bit A/D Converter (HSADC) if Extract MCU
The PCPWM can generate up to eight complementary PWM outputs with dead-band time insertion. Overdrive current is detected by off-chip analog comparators or the digital fault inputs (FLTA, FLTB).
The MFM Quadrature Encoder Interface provides precise rotor position feedback and/or velocity measurement. The MFM 3 X input capture or external interrupts can be used to detect the rotor state for electrically commutated motor applications using Hall Sensor feedback, such as BLDC motor drives when Extract MCU.
PIC18F2331/2431/4331/4431 devices also feature Flash program memory and an internal RC oscillator with built-in LP modes.
New Core Features
nanoWatt TECHNOLOGY before Extract MCU
All of the devices in the PIC18F2331/2431/4331/4431 family incorporate a range of features that can significantly reduce power consumption during operation. Key items include:
· Alternate Run Modes: By clocking the controller from the Timer1 source or the internal oscillator block, power consumption during code execution can be reduced by as much as 90% if Extract MCU.
· Multiple Idle Modes: The controller can also run with its CPU core disabled, but the peripherals are still active. In these states, power consumption can be reduced even further, to as little as 4% of normal operation requirements before Extract MCU.
Special Microcontroller Features:
· 100,000 erase/write cycle enhanced Flash program memory typical
· 1,000,000 erase/write cycle data EEPROM memory typical
· Flash/data EEPROM retention: 100 years when Extract MCU
· Self-programmable under software control
· Priority levels for interrupts
· 8 X 8 Single-cycle Hardware Multiplier
· Extended Watchdog Timer (WDT):
- Programmable period from 41 ms to 131s
· Single-supply In-Circuit Serial Programming™ (ICSP™) via two pins if Extract MCU
· In-Circuit Debug (ICD) via two pins
- Drives PWM outputs safely when debugging
This family offers the advantages of all PIC18 microcontrollers – namely, high computational performance at an economical price, with the addition of high endurance enhanced Flash program memory and a high-speed 10-bit A/D converter before Extract MCU.
On top of these features, the PIC18F2331/2431/4331/4431 family introduces design enhancements that make these microcontrollers a logical choice for many high performance, power control and motor control applications. These special peripherals include after Extract MCU:
· 14-bit resolution Power Control PWM Module (PCPWM) with programmable dead time insertion
· Motion Feedback Module (MFM), including a 3-channel Input Capture (IC) Module and Quadrature Encoder Interface (QEI)
· High-speed 10-bit A/D Converter (HSADC) if Extract MCU
The PCPWM can generate up to eight complementary PWM outputs with dead-band time insertion. Overdrive current is detected by off-chip analog comparators or the digital fault inputs (FLTA, FLTB).
The MFM Quadrature Encoder Interface provides precise rotor position feedback and/or velocity measurement. The MFM 3 X input capture or external interrupts can be used to detect the rotor state for electrically commutated motor applications using Hall Sensor feedback, such as BLDC motor drives when Extract MCU.
PIC18F2331/2431/4331/4431 devices also feature Flash program memory and an internal RC oscillator with built-in LP modes.
New Core Features
nanoWatt TECHNOLOGY before Extract MCU
All of the devices in the PIC18F2331/2431/4331/4431 family incorporate a range of features that can significantly reduce power consumption during operation. Key items include:
· Alternate Run Modes: By clocking the controller from the Timer1 source or the internal oscillator block, power consumption during code execution can be reduced by as much as 90% if Extract MCU.
· Multiple Idle Modes: The controller can also run with its CPU core disabled, but the peripherals are still active. In these states, power consumption can be reduced even further, to as little as 4% of normal operation requirements before Extract MCU.
订阅：
博文 (Atom)